Filter
Top Products
Operating Instructions
40
Using the zoom feature on the Buffered Image page
• The optical zoom is not available while playing back buffered images with the
[Play] button, however a 10x digital zoom is available. You can zoom in and out
using the mouse or scroll wheel (see page 26).
• The zoom depth (x1.0—x10.0) is displayed while zooming.
• As the magnification increases, the image quality decreases.
Note
• The buffered images are displayed chronologically.
• Date, time and frame number are not displayed in play mode.
• Still images (not being played) from the Buffered Image page can be saved. Put
the cursor on the image, and right-click it. Then select [Save Picture As...].
• The maximum number of buffered images changes depending on resolution,
image quality and the specific images the camera is buffering. At 320 x 240
pixels resolution and standard quality, the camera can buffer about 125 frames.
(If 3 triggers are enabled [maximum 5 triggers], the internal memory or the SD
memory card capacity is divided into 3 sections. In this case, each trigger can
buffer about 40 frames.) See page 191 for more details regarding the internal
memory capacity. See page 192 for the SD memory card capacity.
1.8.1 Deleting Buffered Images
If you intend to delete images for each transfer method, click [Delete Buffered
Images] on the Trigger page (see page 97, page 107, or page 119).
Note
• If you click [Save] on the Trigger page, all buffered images on the SD memory
card are deleted.
• If you are buffering images to the internal memory, the following operations also
delete all buffered images.
– Turning off or restarting the camera.
– Updating the camera.
– Resetting the camera to default.
– Saving the Date and Time page.
– Changing the Enable/Disable settings on the Image Buffer/Transfer page
(see page 97, page 107, or page 119).