Operating Instructions
8
1Table of Contents
1 Camera Monitoring
1.1 BB-HCM381A Feature Locations
1.1.1 Front View
Indicator Display
*1 The indicator turns orange if the camera is not connected to the LAN.
*2 The indicator blinks orange if the camera is not connected to the LAN.
*3 See page 3 and 4 the Troubleshooting on the CD-ROM for information on indicator error
codes.
Auto Focus/Zoom Lens
Wide: 5 mm (3/16 inches) —Infinity
Tele: 1 m (3 feet 3 inches) —Infinity
Indicator
The indicator color shows camera status (see
page 153).
SD Memory Card Cover
Protects the SD Memory Card from dust. Remove
the cover only when removing the SD Memory
Card (see page 140).
Power
on
Normal Operation*
1
Updating Firmware
Getting IP address*
2
Got IP address
Setting
Finished setting
Not on LAN
Orange blinking
Orange blinking
(The camera restarts after that.)
FACTORY DEFAULT RESET
button pressed
Orange blinking Turning off
UPnP
TM
Failure Orange blinking (About a 2-second interval)
On LAN
Using
DHCP
Automatic
Setup
Internal Failure Red blinking*
3
Orange blinking Green
Green
Green
Green
Green blinking
Green blinking
Green blinking
Green blinking