Filter
Top Products
Operating Instructions
161
6.1.7 Loading Settings from a Configuration File
Camera settings can be loaded from a configuration file. If you reset the camera to
factory default, the camera can load previously used settings from a configuration
file.
Note
• The configuration file also saves network settings. When settings are loaded,
the network settings are also loaded.
• If you try to update the camera, create a configuration file after updating the
firmware. If there is a firmware version difference between the camera that you
create a configuration file from and the camera that you try to load settings to,
the settings may not have been loaded to the camera.
1. Click [Load Settings] on the Maintenance page.
2. Click [Browse...].
3. Select the configuration file on the Choose file dialog box, and click [Open].
• The file name is displayed in the data field.
4. Confirm the file name, and click [Load].
5. Click [Restart].
• The camera restarts, and the Top page is displayed.