Filter
Top Products
Operating Instructions
64
4. Click [Save] when finished.
• The new settings are saved.
5. Click [Cancel].
• The IPsec page is displayed.
6. Check [Use] in the IPsec column, uncheck the encoding strength, and click
[Save].
Pre-Shared Key • This is the key used in the authentication of
communications. Enter the same pre-shared key as
your VPN router.
• Enter ASCII characters for the host name (see page
190). But [Space], ["], ['], [&], [<] and [>] are not
available.
Note
• If the pre-shared key becomes known to a third party, it
may lead to illegal access, a leak of private information
or interference. To protect your security and privacy,
pay attention to the following points.
– Make it known only to people you trust.
– Set it as long and complex as possible.
– Change it regularly.
Network address • Enter the destination network address.
• Enter "IP address/Prefix length" in the data field.
Router address • Enter the WAN IP address of the destination network
VPN router.
Note
• An IPv6 link-local address is not available.
• The camera can be accessed only from PCs under
the VPN router. Other PCs cannot access the
camera.
Setting Description