Panasonic BB-HCE481A Digital Camera User Manual


 
Operating Instructions
65
7. Click [Restart].
8. Set up your VPN router as shown below.
To use tunnel mode, you need to set up your VPN router.
Setting Description
IPsec Check the box to enable IPsec features. If you uncheck
the box, all IPsec features will be invalid.
Encoding strength The encoding strength for IPsec can be selected. If you
select [Standard], DES or NULL is valid as an
algorithm, and the data will become easier to decrypt.
IKE Items Settings
Phase 1 Authentication
Method
Pre-shared Key Method
ID Specifies by address.
Mode
Main mode
*1
*1 The camera does not support aggressive mode.
Diffie-Hellman
MODP Group
Specifies 1 or 2.
Cipher Algorithm Select from DES-CBC, 3DES-CBC or
AES-CBC (128, 192, 256 bits).
(Multiple selections are available.)
Message-Digest
Algorithm
HMAC-MD5, HMAC-SHA-1
Lifetime Specifies by 28800 s (Byte setting is
not supported.)
Phase 2 Mode Quick mode
PFS Specifies either of Off, D-H Group 1
or D-H Group 2.
Cipher Algorithm Select from DES-CBC, 3DES-CBC,
AES-CBC (128, 192, 256 bits) or
NULL. (Multiple selections are
available.)
Message-Digest
Algorithm
HMAC-MD5-96, HMAC-SHA-1-96
Lifetime Specifies by 28800 s (Byte setting is
not supported.)