Panasonic BB-HCE481A Digital Camera User Manual


 
Operating Instructions
149
Note
If your camera will only be accessed on your local network, use each
camera's local IP address and port number.
If you intend to access your camera from the Internet, you must use each
camera's host name (global IP address) and the port number.
4. Click [Save] when finished.
The new settings are saved.
The Multi-Camera Setup page is displayed.
Setting Description
Display Check this box to enable the camera.
IP Address
*1
or
Host Name
*2
*1 In IPv4, set 4 numbers (0—255) and 3 periods, such as "192.168.0.253". Note that
"0.0.0.0" and "255.255.255.255" are not available.
In IPv6, set the host name.
*2 Enter ASCII characters for the host name (see page 190). Note that [Space], ["], ['], [#],