Filter
Top Products
Operating Instructions
153
5.5 Changing the Indicator Display
The Indicator Control page allows you to select an operation for the indicator.
There are three options.
•Always on
• Turn the indicator on when the camera is accessed.
•Always off
1. Click [Indicator Control] on the Setup page.
2. Select an option.
• To turn indicator always on, check [Turn indicator on when camera is on]
(see page 8 [BB-HCM381A] or page 10 [BB-HCE481A]).
• To turn indicator when the camera is accessed, check [Turn indicator on
during camera access].
• To turn indicator always off, check [Never turn indicator on].
• Clicking [Cancel] cancels your settings without saving changes.
Note
• Selecting [Never turn indicator on] keeps indicator always off even if the
camera is connected to a network.
3. Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4. Click [Go to Indicator Control page].
• The Indicator Control page is displayed.