Filter
Top Products
Operating Instructions
150
5.3 Specifying Operation Time
The Operation Time page allows you to limit the time that the camera is in use. The
camera image turns to a gray screen outside operation time.
Note
• Your privacy may be compromised if the time period is set incorrectly. Confirm
the time period after the setup.
• If you access the camera as an administrator, you can view the image outside
the time period.
1. Click [Operation Time] on the Setup page.
2. Click a No. to set the operation time.
Note
• If No. 1—7 are disabled, the camera can always be operated.
3. Check [Enable], set the time, and click [Save].
• Clicking [Cancel] takes you back to the previous page without saving
changes.