Filter
Top Products
11
VQT1H62
Quick Guide
ª Charging the battery
1 Connect the AC cable to the AC adaptor
and the AC outlet.
2 Put the battery on the battery mount by
aligning the mark, and then securely plug
it in.
≥ The output plug of the AC cable is not
completely connected to the AC adaptor jack.
As shown in A, there is a gap.
ª Inserting the battery
1 While sliding the SD CARD/
BATTERY OPEN lever A, move the SD
card/battery cover and open it.
2 Insert the battery until it clicks while
paying attention to the direction of the
battery.
B Push the center of the battery until it locks.
3 Close the SD card/battery cover.
≥ Securely close it until it clicks.
ª Removing the battery
1 Open the SD card/battery cover.
2 Remove the battery.
≥ Move A in the direction of the arrow to unlock
it and then remove the battery.
3 Close the SD card/battery cover.
ª How to turn on the power
While pressing the lock release button, set
the mode dial to or .
≥ Rotate the mode dial while at the same time
pressing in the lock release button A if
changing from OFF to another mode.
≥ Align with the status indicator B.
ª How to turn off the power
Set the mode dial to OFF.
A
A
1
2
B
A
A
B
VQT1H62_ENG_PP.book 11 ページ ２００７年７月１７日 火曜日 午後５時４４分