Filter
Top Products
71
VQT1H62
Editing
≥ To delete an unwanted part of a scene, divide
the scene first, and then delete the
unnecessary part. (l below)
≥ Scenes which cannot be played back (the
thumbnails are displayed as ) cannot be
deleted.
≥ Protected scenes cannot be deleted.
≥ Do not open the SD card/battery cover while
deleting. The deletion will stop.
≥ In case of [ALL SCENES], the deletion may
take time if there are many scenes on the SD
card.
≥ Do not turn off this unit while deleting.
≥ When you delete scenes, use a battery with
sufficient battery power or use the AC adaptor.
≥ If you delete scenes recorded on other
products with this unit, all the data related to
the scenes may be deleted.
To delete an unnecessary portion of a scene, first
divide the scene and then delete the
unnecessary portion.
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1 Press the MENU button, then
select [EDIT SCENE] # [DIVIDE]
# [SET] and press the cursor
button.
2 Select the scene to be divided,
then press the cursor button.
The selected scene is played back.
3 When you reach the area where
you want to divide the scene,
press the cursor button down to
set the dividing point.
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (l 65, 66)
4 When the confirmation message
appears, select [YES], then press
the cursor button.
5 Delete the unnecessary scene.
Refer to page 70 for how to delete scenes.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
To delete all the divided points
Press the MENU button, then select
[EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
and press the cursor button.
≥ When the confirmation message appears,
select [YES], then press the cursor button.
≥ All divided points set on this unit will be
canceled.
≥ The scenes that were deleted after division
cannot be recovered.
≥ Scenes cannot be divided if the number of
scenes has reached 999.
≥ It may not be possible to divide scenes with a
short recording time.
≥ If images that have been divided are played
back on another device, the points where the
scenes join may not be clear.
≥ Data that has been recorded on another device
cannot be divided.
≥ Data that has been recorded or edited on
another device cannot be divided and the
divided points cannot be deleted.
Dividing a scene to delete
This is for dividing a scene into two to
delete an unnecessary portion.
VQT1H62_ENG_PP.book 71 ページ ２００７年７月１７日 火曜日 午後５時４４分