Filter
Top Products
70
VQT1H62
Editing
Editing
Editing scenes
The deleted scenes cannot be restored.
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1 Press the button during
playback.
2 When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the [ ] (motion
picture playback) tab.
1 Press the button while the
thumbnail view screen is
displayed.
2 Move the cursor button up or
down to select [SELECT] or [ALL
SCENES] and press the cursor
button.
≥ When [ALL SCENES] is selected, the following
scenes except the protected scenes will be
deleted. Proceed to step 5.
jWhen [PLAY MODE] is set to [VIEW ALL]:
All the scenes on the SD card
jWhen [PLAY MODE] is set to [BY DATE]:
All the scenes selected by date
3 (Only when [SELECT] is selected in step 2)
Select the scene to be deleted,
then press the cursor button.
The selected scene is encircled by a red frame.
≥ When the cursor button is pressed again, the
scene will be unselected.
≥ Up to 99 scenes can be selected in
succession.
4 (Only when [SELECT] is selected in step 2)
Press the button.
5 When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥ You can also delete scenes by pressing the
MENU button, selecting [EDIT SCENE] #
[DELETE] and then selecting [ALL SCENES]
or [SELECT].
Deleting scenes
This is for deleting scenes recorded
on SD cards.
Deleting scenes one at a time
Deleting multiple scenes from the
thumbnail display
VQT1H62_ENG_PP.book 70 ページ ２００７年７月１７日 火曜日 午後５時４４分