Filter
Top Products
62
VQT1H62
Recording
≥ Sunrise, sunset etc.
To restore to the automatic adjustment
Set the white balance mode to [ ].
≥ You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
1 Select [ ], fill the screen with a
white subject.
2 Move the cursor button up to
select [ ].
≥ When the [ ] display stops from flashing the
setting is complete.
≥ If the [ ] display continues flashing, the
white balance cannot be set because it is too
dark etc. In this case, use the automatic white
balance.
ª White balance sensor
The white balance sensor A detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.
ª Black balance adjustment
This is one of the 3CCD system functions that
automatically adjusts the black when the white
balance is set in the manual adjustment mode.
When the black balance is adjusted, the screen
will temporarily be black. (The black balance
cannot be adjusted manually.)
1 Black balance adjustment in progress.
(Flashes.)
2 White balance adjustment in progress.
(Flashes.)
3 Adjustment completed. (Lights up.)
≥ When the [ ] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
≥ When setting both the white balance and the
iris/gain, set the white balance first.
To set the white balance manually
AWB
A
123
VQT1H62_ENG_PP.book 62 ページ ２００７年７月１７日 火曜日 午後５時４４分