Filter
Top Products
Others
117
VQT1H62
Recorded still pictures
are not clear.
≥ Are you trying to record small or finely detailed objects with
[PICT. QUALITY] set at [ ]?
# If you try to record small or finely detailed objects with
[PICT. QUALITY] set at [ ], the images may break up into a
mosaic-like pattern. Record with [PICT. QUALITY] set at [ ]
instead. (l 48)
Sound is not played back
from the built-in speaker
of this unit.
≥ Is the volume too low?
# During playback, move the volume lever to display the volume
indication and adjust it. (l 66)
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
≥ Does the input switch on the TV match the connected terminal?
# Please read the operating instructions of your TV and select the
channel that matches the input used for the connection.
≥ Is the [TV ASPECT] setting correct?
# Change the setting to match the aspect ratio of the TV. Press the
MENU button, then select [SETUP] # [TV ASPECT] # [16:9] or
[4:3] and press the cursor button.
≥ If both HDMI and component cables are connected, priority in
recording mode is given to the output from the HDMI cable. If you
set the unit to playback mode, output is from both cables.
Scenes cannot be
deleted.
≥ Is the scene on the SD card protected?
# Protected scenes cannot be deleted. Release the protect setting.
(l 72)
≥ Scene which cannot be displayed as thumbnails (the thumbnails
are displayed as ) cannot be deleted. If the scenes are
unnecessary, format the card to erase the data. (l 75) Please be
aware that if a card is formatted then all the data recorded on the
card will be erased.
≥ Is the file on the SD card protected?
# Protected files cannot be deleted. Release the protect setting.
(l 73)
≥ If the SD card’s write protect switch is set to LOCK, then deletion is
disabled. (l 25)
The images on the SD
card do not look normal.
≥ The data may be destroyed. It may have been destroyed by static
or electromagnetic waves. Store important data on a computer or
other products as well.
Even if an SD card is
formatted, it cannot be
used.
≥ Either this unit or the SD card may be damaged. Please consult a
dealer. Use an SD card from 8 MB to 8 GB with this unit.
If the SD card is inserted
in this unit, it is not
recognized.
≥ Is the SD card formatted on a computer inserted?
# Use this unit to format SD cards. Please be aware that if an SD
card is formatted, then all the data recorded on the card will be
erased. (l 75)
Problem Check points
VQT1H62_ENG_PP.book 117 ページ ２００７年７月１７日 火曜日 午後５時４４分