Filter
Top Products
30
VQT1H62
Setup
Connecting to the AC outlet
1
Connect the AC cable to the AC
adaptor and the AC outlet.
2 Connect the DC cable to the AC
adaptor.
3 While sliding the SD CARD/
BATTERY OPEN lever A, move
the SD card/battery cover and
open it.
4 Open the battery cable cover.
5 Attach the DC cable.
B Push the center until it locks.
6 Close the SD card/battery cover.
≥ Securely close it until it clicks.
≥ Pass the DC cable through the SD card/battery
cover as shown in the illustration.
≥ Do not use the AC cable with any other
equipment as it is designed only for this unit.
Do not use the AC cable from other equipment
with this unit.
ª About the battery pack holder kit
(VW-VH04; optional)
If using the battery pack holder kit, open the
battery cable cover on this unit and then pass the
DC cable for the battery pack holder kit through
the SD card/battery cover.
≥ Read the operating instructions of the battery
pack holder kit for details on how to use it.
≥ If you are not attaching the DC cable for use,
close the battery cable cover.
≥ While the DC cable is connected to the AC
adaptor, the battery will not charge.
A
1
2
B
VQT1H62_ENG_PP.book 30 ページ ２００７年７月１７日 火曜日 午後５時４４分