Filter
Top Products
57
VQT1H62
Recording
To cancel the guide line function
Press the MENU button, then select [BASIC] or
[PLAY SETUP] # [GUIDE LINES] # [OFF] and
press the cursor button.
≥ The guide lines do not appear on the images
actually recorded.
≥ The guidelines are not displayed while rotating
the LCD monitor frontward to record yourself.
¬Rotate the mode dial to select .
Press the MENU button, then select
[VIDEO] # [WIND CUT] # [ON] and
press the cursor button.
To cancel the wind noise reduction
function
Press the MENU button, then select [VIDEO] #
[WIND CUT] # [OFF] and press the cursor
button.
≥ This function’s default setting is [ON].
≥ The wind noise reduction depends on the wind
strength. (The stereo effect may be reduced if
this function is activated in strong winds.
However, the stereo effect is automatically
restored when then the wind weakens.)
When recording, the input level from the built-in
microphones can be adjusted.
¬Rotate the mode dial to select .
1 Press the MENU button, then
select [VIDEO] # [MIC LEVEL] #
[SETrAGC] or [SET] and press
the cursor button.
AGC: Auto Gain Control
[AUTO]: AGC is activated, and the
recording level is adjusted
automatically.
[SETrAGC]: The desired recording level can
be set. AGC will also be
activated to reduce the amount
of sound distortion.
[SET]: AGC is not activated and so
natural recording can be
performed.
2 Move the cursor button left or
right to adjust the microphone
input level.
A Left
B Right
C Microphone input level
≥ A gain value for each of the 2 built-in
microphones is displayed. (The input level of
the microphones cannot be set individually.)
Wind noise reduction function
This is for reducing the wind noise
coming into the microphone when
recording.
Microphone level
This is for adjusting the microphone
input level.
A B
C
VQT1H62_ENG_PP.book 57 ページ ２００７年７月１７日 火曜日 午後５時４４分