Filter
Top Products
Before Use
-21-
≥More vertical bars indicates stronger brightness
or color saturation.
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD] (26) Button.
When you press [POWER LCD] Button, the LCD
monitor becomes about twice as bright as usual.
≥The [POWER LCD] Lamp
(26) lights up.
≥When turning the power on while using AC
Adaptor, [POWER LCD] function is
automatically effective.
To Resume Normal Brightness
Press the [POWER LCD] Button again.
To Change the Picture Quality of the LCD
Monitor (PV-GS200 only)
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
vivid. (The effect varies according to the
recording scene.)
≥When Power LCD Lamp lights up, [LCD AI] is
automatically set to [ON]. You can not change
this setting. (PV-GS200 only)
≥These adjustments do not affect the recorded
images.
≥For other notes concerning this item, see
-81-.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Camcorder displays various function
setups on Menus.
≥When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or
rotate the LCD monitor by 180o.
1 Press the [MENU] Button (14).
POWER
LCD
(26)
STILL
ENTER
FADE
MENU
is
(14)
≥The Menu corresponding to the Mode
selected by using the Mode Dial
(39) is
displayed.
2 Press the [;/∫] Button to select a desired
Sub-Menu.
≥Press the [;/∫] Button to display the
highlighted item.
3 Press the [5] Button to display the
selected Sub-Menu.
4 Press the [;/∫] Button to select the item.
5 Press the [5] Button to display the
selected item.
6 Press the [;/∫] Button to select the desired
mode and press [ENTER] Button to
determine the setting.
≥While a Menu is displayed, you cannot record or
play back. Menus can be displayed during
playback but not during recording. The above
operations can be done using the [MENU]
Button, [π, ∑, ∏, ∫] Buttons and [ENTER]
Button on the Remote Controller. (
-14-)
To Return to the Previous Screen
Press the [6] Button.
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained
even when the Camcorder is turned off. (The
setups of [EFFECT2] (
-39-) are not retained.)
However, if the Battery or AC Adaptor is
disconnected before turning off the Camcorder,
the selected setup may not be retained.
≥Menu operation flow is shown in this text by >>.
ª File Selection in the Picture/MPEG4
Playback Mode (MPEG4 Playback
Mode on PV-GS200 Model only)
A File Selection Operation may be necessary
during Menu Operations. In this case, carry out
the following procedure.
1 Press the [;/∫/6/5] Button and select
a file.
≥The selected file is marked by a frame.
PC
S
D
(39)
PICTURE
No.25 100-0012
PV-GS120_200Eng.book 21 ページ ２００４年２月１６日 月曜日 午後１時３２分