Filter
Top Products
Others
-76-
≥As you enlarge an image, the quality of the
image deteriorates.
≥During Playback Zoom, the Variable Speed
Search Function cannot be changed with the
Remote Controller.
ª Playback Digital Effect Functions
≥Signals of images to which digital effects are
added during playback cannot be output from
the DV Terminal (
-14-).
≥You cannot use the Wipe or Mix Function while
playing back the non-recorded portion of tape.
ª Playing Back a Card
≥If a blank (nothing recorded) Card is played, the
screen becomes white.
≥If you attempt to play back a file recorded in a
different format or if file data is defective, the
whole display becomes bluish and the
[UNPLAYABLE CARD] Indicator may appear as
warning.
≥When playing back a picture recorded on other
equipment, its size and that of this Camcorder
may appear differently.
≥When playing back a picture recorded on other
equipment, the picture may not be played back
or the quality of pictures may be reduced.
≥When playing back a non standardized file, the
Folder File Number may not be displayed.
≥In the following cases, black bars may appear,
depending on the playback device.
≥When playing back a mega-pixel still-picture
with this Camcorder and recording it onto a
tape
≥Changing the picture size to 640k480 pixels
with DV STUDIO
≥The file format supported by this Camcorder is
ASF. (Not all ASF formatted files will be played
back.) (PV-GS200 only)
≥When you set [SCREEN] on the [DIGITAL]
Sub-Menu to [NORMAL] when playing back
MPEG4 moving pictures, they are displayed
smaller. This is not a malfunction.
(PV-GS200 only)
≥Moving pictures are kept still during
Cue/Review playback. Only the counter number
increases or decreases. (PV-GS200 only)
≥MPEG4 data cannot perform Slow Motion
Playback (forward direction and reverse
direction), Still Advance Playback (forward
direction and reverse direction) or Playback with
Zoom Lever. (PV-GS200 only)
≥If you try to play back an MPEG4-recorded
image for which the [MPEG4 MODE] was set to
a mode other than [ECONOMY] on other
Panasonic cameras, this image will not be
displayed, and the indication [PLEASE
RE-OPERATE AFTER PUSHING RESET
BUTTON], etc., may appear. This is not a
malfunction. (PV-GS200 only)
≥For the MPEG4 moving pictures recorded on
other equipment, [UNPLAYABLE CARD]
Indicator may be displayed when they are
played back. If the [1] Button is pressed in this
case, [!] will be displayed for a few seconds
and the next image will be displayed.
(PV-GS200 only)
≥MPEG4 data cannot be output from the DV
Terminal. (PV-GS200 only)
≥When playing back MPEG4 data recorded on
other equipment, a part of the playback elapsed
time may be indicated as [--] or the date and
time display will be different from when it was
recorded. (PV-GS200 only)
≥If you attempt to play back a file recorded on
other equipment, the [UNPLAYABLE CARD]
Indicator may appear and playback may not be
possible. Or during playback, the
[UNPLAYABLE CARD] Indicator may appear,
the playback picture may be presented in a
time-lapse-like manner, or the picture and the
sound may not synchronize.
ª Slide Show
≥Playback time may take longer than usual
depending on the picture.
ª Creating a Title
≥When set to MPEG4 Playback Mode, Title
Creation Function is not possible. (PV-GS200
only)
≥Regardless of the [PICTURE SIZE] setting, the
size of the created pictures is [640k480].
≥If the [PICTURE SIZE] is set to [1760k1320]
(PV-GS200)/[1280k960] (PV-GS120) and
Mode Dial is set to [ ], title cannot be
created.
≥Even if the contrast of the Title is adjusted, the
portions where there is little difference between
light and dark and where the boundary between
light and dark is unclear may not appear.
≥The Title may not appear well if something
small is used for it.
≥If titles are created, the number of images that
can be recorded on a Card decreases.
≥If the number of images that can be recorded on
a Card is small, you may not be able to create a
title.
PV-GS120_200Eng.book 76 ページ ２００４年２月１６日 月曜日 午後１時３２分