Filter
Top Products
With a PC
-56-
With a PC
Using the Software with a Computer
An image stored on the DV Cassette can be
transferred to your Personal Computer.
ª Software Installation (Windows)
1 Turn on Computer and start up Windows.
2 Insert supplied CD-ROM into the CD-ROM
drive.
≥[Setup Menu] appears.
3 Select the software to be installed from
[Setup Menu].
≥USB Driver
-56-:
Software for USB Driver allows you to
transfer images directly from the Memory
Card into the computer.
≥WebCam Driver
-58-:
If the Camcorder is connected to your
personal computer, you can send video from
the Camcorder to the other parties via a
network or by Internet.
≥DV STUDIO 3.1E-SE
-60-:
Using the DV STUDIO 3.1E-SE software
allows you to capture stills from video
recorded on a tape or still images viewed
through the lens of a camera.
≥G.726 Audio Decoder
-61-:
Software for G.726 Audio Decoder allows you
to listen to MPEG4° sound with Windows
Media Player.
°MPEG4 moving picture files can be recorded
by PV-GS200 only.
≥ArcSoft Software
-62-:
PhotoImpression 4.0, PhotoBase 4.0,
Panorama Maker 3.0 and PhotoPrinter 4.0
are included.
≥Windows Media Update
This update was provided by Microsoft
Corporation. Run this update in cases where
playback of an MPEG4 moving picture file
recorded with a Camcorder is started in
Windows Media Player, but ends with an error
message after 3 to 4 minutes.
4 Follow the instructions on the computer
screen until the installation is complete.
≥Setup window will disappear when the
installation is complete.
Note:
If a window does not appear automatically, click
the “Start” Button on your desktop and then click
“Run”. When the “Run” Box is open, type in
“D:\InstMenu.exe” and click “OK”. (“D” is used
when the CD-ROM drive is drive D.)
Using USB Driver
ª Operating environment
≥Despite having the operating environment
indicated, it may not be possible to use the
program with some types of personal
computers.
≥A CD-ROM drive is required to install this
program.
OS:
IBM PC/AT compatible personal computer with
pre-installed;
Microsoft Windows XP Home Edition/
Professional
Microsoft Windows 2000 Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium II/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
(128 MB or more required for Windows XP)
Free hard disk space:
At least 30 MB or more
Ports:
USB Terminal
ª Installing USB Driver
Please install USB Driver first before connecting
the Camcorder to your Personal Computer with
the USB Connection Cable.
1 Turn on the Personal Computer and start up
Windows.
2 Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
3 Click the [USB Driver].
≥The set up program starts running.
4 For Windows 98SE/Me/2000 users, click
[Restart] if the [InstallShield] dialog
appears.
≥Do not remove the CD-ROM.
5 Finish installation by following the
on-screen instructions.
≥Click [Next] and proceed with installation.
≥After completing the installation, Click
[Finish].
6 After the USB Driver is installed, please
restart your computer.
PV-GS120_200Eng.book 56 ページ ２００４年２月１６日 月曜日 午後１時３２分