Filter
Top Products
Playback Mode
-45-
To Change the Enlarging Area of an Image
3 Press the Arrow Button (π, ∑, ∏, ∫) (63)
on the Remote Controller that points to the
area you want to enlarge.
To Cancel the Playback Zoom Function
Press the [P.B. ZOOM] Button (81) on the
Remote Controller.
≥For other notes concerning this item, see
-75-.
Playback Digital Effect Functions
During playback, special digital effects can be
added to the recorded pictures. The same effects
as those of Digital Effects 1 and 2, which are
used during recording, are obtained.
1 Press the [1] Button (79).
2 Press the [SELECT] Button (66) on the
Remote Controller to select a desired digital
effect.
≥When the [SELECT] Button is pressed
repeatedly, the digital effect selection
changes.
≥The same setting can be done using
[EFFECT SEL] Sub-Menu on the
[TAPE PLAYBACK MENU].
To suspend Playback Digital Effect
Temporarily
Press the [OFF/ON] Button (68) to suspend or
restart the digital effect. When the digital effect is
paused temporarily, the selected effect’s
indication flashes.
To Cancel the Digital Effect
Press the [SELECT] Button (66) on the Remote
Controller and clear the digital effect indication.
ª Wipe Mode and Mix Mode
1 Press the [1] Button (79).
INDEX INDEX
SC
STOP
KL
∫
V
/REW
STILL ADV
W
s
V
PLAY
PAUSE
FF/
W
STILL ADV
615
;
ED
P.B. ZO OM
(79)
SELECT
STORE
OFF/ON
P.B.DIGITAL
ENTER
VAR.
SEARCH
MENU
(66)
(68)
INDEX INDEX
SC
STOP
KL
∫
V
/REW
STILL ADV
W
s
V
PLAY
PAUSE
FF/
W
STILL ADV
615
;
ED
P.B. ZO OM
(79)
2 Press the [SELECT] Button (66) on the
Remote Controller and select [WIPE] or
[MIX].
3 Press the [STORE] Button (67) at the
moment you want to save as a still picture.
≥The [B] or [C] Indication appears, and
the image is saved.
4 Press the [OFF/ON] Button (68) in the scene
in which you want to use the Wipe or Mix
effect.
≥The scene changes as a result of the Wipe or
Mix effect.
≥The Wipe Function and Mix Function can only
be accessed by using the Remote Controller
during playback.
≥If the [OFF/ON] Button
(68) is pressed while
Wipe or Mix is carried out, the effect will stop
temporarily at that point. Pressing the [OFF/ON]
Button
(68) again will bring back the effect.
≥For other notes concerning this item, see
-76-.
Playing Back a Card
It plays back files recorded on a Card.
1 Set the Mode Dial (39) to Picture Playback
Mode or MPEG4 Playback Mode. (MPEG4
Playback Mode on PV-GS200 Model only)
2 Start Playback.
[PICTURE]:
1: Starting the Slide Show
5: Playing back the next picture
6: Playing back the previous picture
∫: Stop the Slide Show
;: Pause the Slide Show
[MPEG4] (PV-GS200 only):
1: Playing back the File
5: Selecting the next file (When you press this
button during playback, you can search the
next file, and when you keep pressing it, cue
playback is activated.)
6: Selecting the previous file (When you press
this button during playback, you can search
the beginning of the file, and when you keep
pressing it, review playback is activated.)
∫: Stop playing back
;: Pause playing back
SELECT
STORE
KL
∫
OFF/ON
P. B. D IG I TA L
ENTER
VAR.
SEARCH
MENU
(66)
(67)
(68)
P
C
S
D
P
C
S
D
(39)
PV-GS120_200Eng.book 45 ページ ２００４年２月１６日 月曜日 午後１時３２分