Filter
Top Products
With a PC
-65-
Removing the USB connection cable safely
for Macintosh
1 Drop the [NO_NAME] icon which appeared
when you connected the Camcorder with
the USB connection cable into the recycle
bin, then disconnect the USB connection
cable.
If the above operation is not performed correctly,
when data is copied from the Personal Computer
to an SD Memory Card, the copied data may be
damaged.
When the following operations are performed, the
same results will occur as when the USB cable is
incorrectly removed (above). Therefore, it is
imperative that the above operation is completed
before proceeding.
≥When SD Memory Card is removed.
≥When Camcorder power is turned OFF.
≥When Mode Dial
(39) is turned to change
modes.
If you no longer need software or
driver (Uninstall)
The screens may vary with the type of OS.
1 Select [Start] (>> [Settings]) >>
[Control Panel], select the software or the
driver from [Add/Remove Programs] to
uninstall.
≥Uninstalling steps may vary depending on the
OS. Please refer to the user manual of your OS.
ON
O
FF
PC
S
D
(39)
Notes
≥Macintosh is a registered trademark of Apple
Computer, Inc. ArcSoft, the ArcSoft logo,
ArcSoft PhotoImpression 4.0, ArcSoft
PhotoBase 4.0, ArcSoft Panorama Maker 3.0
and PhotoPrinter 4.0 are trademarks of ArcSoft,
Inc.
≥Microsoft
®
, Windows
®
, Windows Messenger
®
,
MSN Messenger
®
and DirectX
®
are either
registered trademarks or trademarks of the
Microsoft Corporation in the United States
and/or other countries.
≥Intel
®
, Pentium
®
and Celeron
®
are the
registered trademarks or trademarks of the Intel
Corporation.
≥All other names, company names, product
names, etc. in these instructions are the
trademarks or registered trademarks of their
respective corporations.
≥The names of the products you are using may
differ from the names given in the text.
Depending on the operating environment and
other factors, the contents of the screens used
in these instructions may not necessarily match
what you will see on your screen.
≥Although the screens in these Operating
Instructions are shown in English for the sake of
example, other languages are supported as
well.
≥These instructions do not cover the basic
operations of the personal computer or define
any terms. For this information, refer to the
Operating Instructions which accompany your
personal computer.
≥Do not disconnect USB Connection Cable while
the operation light of Camcorder is on. It may
freeze the software or destroy the data in
transfer.
≥We recommend using the AC adaptor as the
power source for the Camcorder when using
USB Connection Kit. Data may be lost If the
battery power is lost while transferring data.
≥If the Camcorder is used as a Web Camera
while virus checking software is running, the
Camcorder’s operation may stop midway
through. In this case, exit the Windows
Messenger or MSN Messenger, reconnect the
Camcorder and restart the Windows Messenger
or MSN Messenger.
≥G.726 may not recognize Memory Card files not
created by Camcorder.
≥Do not delete the folders in Memory Card such
as picture folder. Memory card may not be
recognized if folders are deleted.
PV-GS120_200Eng.book 65 ページ ２００４年２月１６日 月曜日 午後１時３２分