Panasonic PV-GS120 Camcorder User Manual


 
Before Use
-22-
2 Press the [ENTER] Button (17) to confirm
the selection of the file.
After the above File Selection Procedure, carry
out the various Menu Operations. (The above
procedure will not be repeated in the following
instructions.)
List of Menus
The figures of the Menus are for explanation
purposes only, and they are different from the
actual Menus.
ª [TAPE RECORDING MENU]
Tape Recording Menu
1) [CAMERA]
Camera Setup Sub-Menu
[PROG.AE]
Auto Exposure Mode
-35-
[EIS]
Image Stabilizer
-33-
[D.ZOOM]
Digital Zoom
-32-
[SELF TIMER]
Self-timer Recording
-31-
[USB FUNCTION]
USB Functions Mode
-59-
[FLASH] (PV-GS200 only)
Flash
-38-
[RED EYE] (PV-GS200 only)
Red Eye Reduction
-39-
[FLASH LEVEL] (PV-GS200 only)
Flash Level
-38-
If you press [6] Button, the menu changes
back to the previous screen.
2) [DIGITAL]
Digital Setup Sub-Menu
[EFFECT1]
Digital Effects 1
-39-
[EFFECT2]
Digital Effects 2
-39-
[MULTI MODE]
Multi-Picture Mode
-40-
[TITLE IN]
Adding a Title
-47-
3) [CARD]
Card Setup Sub-Menu
[PICT QUALITY]
Picture Quality
-29-
[CREATE TITLE]
Title Creation
-47-
4) [RECORDING]
Recording Setup Sub-Menu
;/:SELECT %:NEXT
MENU:EXIT
DIGITAL
CARD
DISPLAY
LCD/EVF
INITIAL
RECORDING
D.ZOOM
SELF TIMER
USB FUNCTION
FLASH
RED EYE
FLASH LEVEL
PROG.AE
TAPE RECORDING MENU
CAMERA !
EIS
[REC SPEED]
Recording Speed Mode
-26-
[AUDIO REC]
Audio Recording Mode
-26-
[SCENE INDEX]
Scene Index Mode
-44-
[WIND CUT]
Wind Noise Reduction
-34-
[ZOOM MIC]
Zoom Microphone
-32-
[CINEMA]
Cinema-like Format Recording
-35-
[H.SHOE MIC] (PV-GS200 only)
Hot Shoe Microphone
This function reduces the low sound to avoid a
wind noise when using the Stereo Zoom
Microphone (optional). Please refer to page
-88-.
5) [DISPLAY]
Display Setup Sub-Menu
[DISPLAY]
Display Mode
-69-
[DATE/TIME]
Date and Time Indication
-69-
[C.DISPLAY]
Counter Display Mode
-69-
[C.RESET]
Counter Reset
-84-
It resets the counter to zero. However, it cannot
reset the Time Code.
6) [LCD/EVF]
LCD/EVF Setup Sub-Menu
[LCD AI] (PV-GS200 only)
Intelligent LCD Monitor
-21-
[LCD/EVF SET]
LCD and Viewfinder Adjustment
-20-
[SELF REC]
Recording Yourself
-31-
[EVF ON/AUTO]
Using the Viewfinder
-20-
7) [INITIAL]
Initial Setup Sub-Menu
[BLANK SEARCH]
Blank Search
-28-
[DEMO MODE]
Demonstration Mode
If no operation takes place for approximately
10 minutes after the AC Adaptor is connected to
the Camcorder and the [OFF/ON] Switch is
turned to [ON] without inserting a Cassette or a
Card, the Camcorder is automatically set to
Demonstration Mode for introducing its
functions. If any button is pressed or operated,
the Demonstration Mode is cancelled. The
Demonstration Mode can be started by setting
[DEMO MODE] to [ON] and by exiting the
Menu. To terminate the Demonstration Mode,
insert a Cassette or set the [DEMO MODE] to
[OFF].
PV-GS120_200Eng.book 22 ページ 2004年2月16日 月曜日 午後1時32分