Panasonic PV-GS120 Camcorder User Manual


 
With a PC
-57-
Reboot the computer to finish installing USB
driver.
Installation continues after the computer
reboots if you selected additional software.
A message indicating a conflict between
versions may be displayed during the
installation. This will not cause a problem.
Simply click [Yes] to proceed with the
installation.
Depending on the OS version, illustrations and
icon names may vary.
For Windows 2000 Users
The conflict message is displayed during
installation. However, testing by the manufacturer
has confirmed functionality of this Camcorder
with Windows 2000. Click [Yes] and proceed.
7 Click [OK] when the [Restarting Windows]
Dialogue box appears.
ª Connecting Computer and Camcorder
Install USB Driver before connecting.
Never connect the USB Connecting Cable
until the USB Driver is installed.
Before making these connections, turn off all
devices which are to be connected.
When using the USB Connection Kit, it is
recommended that you use the AC Adaptor as
the power supply of the Camcorder.
ª For Using Built-in SD Drive
By connecting the Camcorder and Personal
Computer with the USB Cable, you can transfer
still images saved on a Memory Card directly to
your Personal Computer.
For Windows
1 Insert the Memory Card into the Camcorder.
2 Set the Camcorder to PC Mode.
3 Connect the Camcorder to your personal
computer with USB Cable.
It enters PC Connecting Mode.
PC
S
D
4 Open [My Computer] and click
[Removable Disk] (For Windows 98SE/Me/
2000 users).
Click [Open folder to view files using
Windows Explorer] and then [OK] (For
Windows XP users).
You can view images stored on the Memory
Card and also save them to your hard disk.
Please do not change file or folder names on
the Personal Computer. The images on the
Memory Card may then not be viewable on
the Camcorder.
After making the connections, turn the
connected equipment on.
Appropriate driver to recognize Camcorder is
automatically installed by Windows Plug and
Play when connected for the first time.
After the USB Driver is installed and USB
Connection Cable is connected to the
Camcorder, open [My Computer] or
[Windows Explorer] to check that the drive is
displayed as a removable disk drive (only when
card is inserted into the Camcorder). It enables
you to operate it in the same way as a floppy
disk drive, and you can use the same drag and
drop or copy methods.
For Macintosh
OS:
Mac OS X v 10.1 – X v 10.2
CPU:
PowerPC
RAM:
64 MB or more
1 Insert the Memory Card into the Camcorder.
2 Set the Camcorder to PC Mode.
3 Connect the Camcorder to your Macintosh
with USB Cable.
4 Double click the “NO_NAME” icon.
You can view images stored on the Memory
Card and also save them to your hard disk.
Please do not change file or folder names on
the Personal Computer. The images on the
Memory Card may then not be viewable on
the Camcorder.
PC
S
D
PV-GS120_200Eng.book 57 ページ 2004年2月16日 月曜日 午後1時32分