Filter
Top Products
With a PC
-61-
≥DV STUDIO 3.1E-SE cannot be operated on
Windows 2000.
≥When 2 or more USB devices are connected to
a personal computer, or when devices are
connected through USB hubs or by using
extension cables, proper operation is not
guaranteed.
≥When connected to the keyboard USB terminal,
normal function may not be possible.
≥This instruction manual describes only the
procedures for installation, connection and
start-up. Please read the PDF-based
instructions for how to use DV STUDIO
3.1E-SE.
≥To view the installed operating instructions,
Adobe Acrobat Reader 5.0 or later is required.
Please install Adobe Acrobat Reader from the
supplied CD-ROM.
≥Before using for the first time, select [Readme]
from [Start] >> [All programs (Programs)] >>
[Panasonic] >> [DV Studio3], and read any
supplementary details or updates.
ª Installation of DV STUDIO 3.1E-SE
1 Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
2 Select the software to be installed from
[Setup Menu].
3 Click [Next].
≥After reading the displayed contents, please
carry out the installation according to
instructions.
4 After the completion of setup, click on
[Finish].
≥Installation will be completed.
≥Sample data is installed concurrently with the
DV STUDIO 3.1E-SE software.
ª To start DV STUDIO 3.1E-SE
1 Set the Mode Dial to Tape Recording Mode
or Tape Playback Mode.
≥If you wish to capture data from a tape, set
the Camcorder to Tape Playback Mode and
insert the tape.
2 Set [CAMERA] or [PLAYBACK] >>
[USB FUNCTION] >> [DV STUDIO].
3 Connect the Camcorder to the Personal
Computer with auxiliary USB Connection
Cable.
4 Select [Start] >> [All Programs (Programs)]
>> [Panasonic] >> [DV Studio3] >>
[DV Studio3].
≥If a shortcut icon was created on the desktop
during installation, it is also possible to start by
double-clicking on the icon.
Using the G.726 Audio Decoder
G.726 Audio Decoder allows you to listen to
MPEG4° sound with Windows Media Player.
Install it from enclosed CD-ROM.
In order for the G.726 Audio Decoder to be
installed, the hard disk must have at least 16 MB
of free space. Before proceeding with installation,
check the amount of free space on the hard disk.
°MPEG4 moving picture files can be recorded by
PV-GS200 only.
PV-GS120_200Eng.book 61 ページ ２００４年２月１６日 月曜日 午後１時３２分