Others
-81-
≥Do not place a Cassette near highly magnetic
substances or equipment.
≥The surface of the tape is covered with
extremely minute magnetic particles, upon
which signals are recorded. Magnetic
necklaces, toys, etc., have a magnetic force that
is stronger than you may expect, and they may
erase the contents of a recording or may cause
noise in images and sounds.
Card
≥When the Card is being read, do not remove the
Card, turn off the power, or subject it to vibration
or impact.
≥Do not leave the Card in places where there is
high temperature or direct sunlight, or where
electromagnetic waves or static electricity are
easily generated.
≥Do not bend or drop the Card. The Card or the
recorded content may be damaged.
≥After use, be sure to remove the Card from the
Camcorder.
≥After usage, store the supplied SD Memory
Card in the enclosed bag.
≥Do not touch the terminals on the back of the
Card with your fingers. Do not allow dirt, dust or
water to enter it.
≥Keep the Memory Card out of reach of children
to prevent swallowing.
ª LCD Monitor/Viewfinder/Lens Hood
LCD Monitor
≥In a place with drastic temperature changes,
condensation may form on the LCD Monitor.
Wipe it with soft dry cloth.
≥If your Camcorder is extremely cold when you
turn its power on, the image on the LCD Monitor
is slightly darker than usual at first. However, as
the internal temperature increases, it goes back
to the normal brightness.
(PV-GS200)
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
123,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.
(PV-GS120)
Viewfinder
≥Do not direct the Viewfinder or Lens at the sun.
Internal components may be seriously
damaged.
≥To clean the inside of the Viewfinder, keep
pressing 1 and hold the Eyecup 2 and pull it
out.
Lens Hood
≥Attach the MC Protector (not supplied) or the
ND Filter (not supplied) on the Lens Hood.
≥Do not attach anything other than the MC
Protector (not supplied) or the ND Filter (not
supplied) to the Lens Hood.
≥When you wish to attach the Tele Conversion
Lens (not supplied) or Wide Conversion Lens
(not supplied), first of all, turn the Lens Hood
counterclockwise and take it off. Then attach
the conversion lens by turning it clockwise.
When you attach the Lens Hood back, insert 1
into the slot 2 and turn it clockwise.
≥If you push the [W/T] Lever toward [W] during
recording with the filter and conversion lens
attached together to the Camcorder, 4 corners
of the image may become dark (vignetting). For
details, please refer to the operating instructions
of your accessories.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
113,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.
Extremely high precision technology is
employed to produce the Viewfinder screen
featuring a total of approximately 123,000
pixels. The result is more than 99.99%
effective pixels with a mere 0.01% of the
pixels inactive or always lit. However, this is
not a malfunction and does not affect the
recorded picture.
2
1
1
2
PV-GS120_200Eng.book 81 ページ 2004年2月16日 月曜日 午後1時32分