Filter
Top Products
C611M-C (3/06) 23
Figure 11. Add Server
4. Enter the desired name for the NVR300 external RAID machine and the IP address of the NVR300 with the DX9200HDDI unit(s) attached.
Click the OK button. A window showing the added HDDI(s) appears.
Figure 12. HDDIs Added
5. The ACSGateway Config window should look similar to Figure 12.
If you do not see anything listed on the right side of the window, double-click the newly-created server. If nothing appears after that then
either the IP address was incorrect or there is a connection issue.
If there is only one DX9200HDDI attached to the NVR300, then only one will be listed on the right side of the window. The RAID manager
software automatically detects what is attached to the NVR300.
Click Setting. The Event Notification tab appears.