Filter
Top Products
C611M-C (3/06) 55
USING THE MPEG VIEWER TO PLAY MPEG FILES
To play recorded video and also audio, if applicable, that was saved as an MPEG file as a result of saving a recording, use the MPEG Viewer
software. (For information about saving a recording, refer to the Saving a Recording section.)
The MPEG Viewer software is an executable application file named MPEGViewer.exe that can be opened from the NVR300 or can be down-
loaded from the NVR300 to any shared drive on the network. The MPEG Viewer software can also be opened from the NVR300 Resource CD or
downloaded from the Pelco Web site at the following address: http://www.pelco.com/software/downloads/pelconet.aspx.
For instructions on how to open the MPEG Viewer software, to download the MPEG Viewer software from the NVR300, and to play an MPEG file,
refer to the sections that follow.
Opening the MPEG Viewer Software
You can open the MPEG Viewer software application from the NVR-Playback page or from the NVR300 Resource CD.
Opening the MPEG Viewer Software from the NVR-Playback Page
To open the MPEG Viewer software from the NVR-Playback page, do the following:
1. Open the NVR-Playback page by clicking the NVR-Playback link.
The NVR-Playback page appears.
2. Click the Get MPEG-viewer software? link that appears at the bottom of the page.
The File Download dialog box appears.
3. Click the Open button.
The MPEG Viewer application file opens. You can now play an MPEG file using the MPEG Viewer. For instructions on how to play an MPEG file,
refer to the Playing an MPEG File section.
Opening the MPEG Viewer Software from the NVR300 Resource CD
To open the MPEG Viewer software from the NVR300 Resource CD, do the following:
1. Locate the MPEGViewer.exe file on the CD.
2. Double-click the file.
The MPEG Viewer application file opens. You can now play an MPEG file using the MPEG Viewer. For instructions on how to play an MPEG file,
refer to the Playing an MPEG File section.
Downloading the MPEG Viewer Software
You can download the MPEG Viewer software from the NVR-Playback page or from the Pelco Web site (http://www.pelco.com/software/
downloads/pelconet.aspx).
To download the MPEG Viewer software from the NVR-Playback page, do the following:
1. Access the NVR-Playback page by clicking the NVR-Playback link.
The NVR-Playback page appears.
2. Click the Get MPEG-viewer software? link that appears at the bottom of the page.
The File Download dialog box appears.
3. Click the Save button.
The Save As dialog box appears.
4. Navigate to the location to which you want to save the MPEG Viewer software.
The MPEGViewer.exe file is downloaded to the desired location, and the “Download complete” dialog box appears. Note the following:
• Clicking Open opens the MPEG Viewer application and allows you to play an MPEG file. For additional information, refer to the
Playing an MPEG File section.