Pentax 15613 Digital Camera User Manual


 
102
Shooting Functions
4
Sets the focusing point when shooting with the viewfinder.
The selected focus point will light red in the viewfinder (Superimpose AF
Area).
1
Press the M button in standby mode.
The control panel appears.
2
Use the four-way controller (2345) to select [AF Active
Area], and press the 4 button.
The [AF Active Area] screen appears.
3
Use the four-way controller (45) to
select a focus point selection mode,
and press the 4 button.
The camera returns to the control panel.
Selecting the Focusing Point (AF Point)
b
Auto (5 AF
Points)
Out of the 5 AF points, the camera selects the optimum AF
point even if the subject is not centered. (default setting)
c
Auto (11 AF
Points)
Out of the 11 AF points, the camera selects the optimum AF
point even if the subject is not centered.
S
Select
Sets the focusing point to the user selected point from eleven
points in the AF frame.
O
Spot Sets the focusing point to the center of the viewfinder.
You can also change the setting from [AF Active Area] in [AF Settings] of the
[A Rec. Mode 2] menu.
The selected focus point will not light red in the viewfinder when [Off] is
selected for [13. Superimpose AF Area] in the [A Custom Setting 2] menu.
The focus point selection mode is fixed to O regardless of this setting when
using lenses other than DA, DA L, D FA, FA J, FA or F lenses.
AF Active Area
AF Active Area
Auto (5 AF Points)
Auto (5 AF Points)
OK
OK
OK
Cancel
Cancel
MENU
AUTO
e_kb524_84percent.book Page 102 Friday, June 15, 2012 12:13 PM