Filter
Top Products
201
Playback Functions and Image Editing
6
4
Turn the AV device and camera on.
The camera turns on in video mode, and the camera information is
displayed on the screen of the connected AV device.
When the hometown is set at the time of initial setting (p.56), the video
output format is set in accordance with that region. Depending on the
country or region, images may fail to be played back with the set video
output format. If this happens, change the setting.
1
Select [Interface Options] in the [R Set-up 2] menu, and press
the four-way controller (5).
The [Interface Options] screen appears.
2
Use the four-way controller (23) to select [Video Out], and
press the four-way controller (5).
3
Use the four-way controller (23) to select [NTSC] or [PAL],
and press the 4 button.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
• You cannot adjust the volume on the camera while the camera is connected
to an AV device. Adjust the volume on the AV device.
• Movies are played back with monaural sound.
• Images are output at normal resolution regardless of the resolution supported
by the AV device. To output HD video, transfer to and play back on a
computer.
Setting the Video Output Format
The video output format differs depending on the region. When you set [Time
Setting] in the World Time setting (p.207) to X (Destination), the video output
setting changes to the video output format for that city. Refer to “List of World
Time Cities” (p.209) for cities that can be selected as a hometown or
destination.
e_kb524_84percent.book Page 201 Friday, June 15, 2012 12:13 PM