Filter
Top Products
260
Appendix
10
Cleaning the CMOS Sensor
If the CMOS sensor becomes dirty or dusty, shadows may appear in the
image in certain situations such as when shooting against a white
background. This indicates that the CMOS sensor must be cleaned.
Shaking the CMOS sensor removes dust from the sensor unit.
1
Select [Dust Removal] in the [R Set-up 3] menu, and press
the four-way controller (5).
The [Dust Removal] screen appears.
2
Press the 4 button.
The Dust Removal function is activated
by shaking the CMOS sensor.
To activate the Dust Removal function
every time the camera is turned on and
off, set [Startup Action] and [Shutdown
Action] to O.
When Dust Removal is completed, the
camera returns to the [R Set-up 3] menu.
Removing Dust by Shaking the CMOS Sensor
(Dust Removal)
MENU
Dust Removal
Dust Removal
Dust Removal
Dust Removal
Startup Action
Startup Action
Shutdown Action
Shutdown Action
Start
Start
OK
e_kb524_84percent.book Page 260 Friday, June 15, 2012 12:13 PM