Filter
Top Products
115
Shooting Functions
4
3
Use the four-way controller (45)
to select Q or R, and press the
4 button.
The camera returns to the control panel.
4
Press the shutter release button halfway.
The Shake Reduction function is
activated, and k appears in the status
screen, viewfinder, and Live View screen.
Q
Uses Shake Reduction. (default setting)
R
Does not use Shake Reduction.
• The Shake Reduction function is not available in the following situations.
- Self-timer shooting - Remote Control shooting
- when p mode is set
- when HDR Capture is set, and the Auto Align function is disabled
- during Composition Adjustment
• The Shake Reduction function is activated in Z (Night Scene HDR) of H
mode.
• The Shake Reduction function will not fully work (for about 2 seconds)
immediately after the camera is turned on or is restored from Auto Power Off.
Wait for the Shake Reduction function to become stable before shooting.
• You can also change the setting from the [A Rec. Mode 3] menu.
Shake Reduction
Shake Reduction
On
On
OK
OK
OK
Cancel
Cancel
MENU
e_kb524_84percent.book Page 115 Friday, June 15, 2012 12:13 PM