Pentax 15613 Digital Camera User Manual


 
158
Shooting Settings
5
The outcome of cross processing varies each time a picture is taken. If a
cross processed image that you like comes out, you can save the Cross
Processing settings used in that image. A total of three Cross Processing
settings can be saved.
1
Press the four-way controller (3) in the single image display of
playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select s (Save
Cross Processing), and press the 4 button.
The camera will search for cross processed images starting from the
most recent image taken. (An hourglass icon is displayed while
searching.) When a cross processed image is found, the screen to save
the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
3
Turn the front e-dial (R) to select
a cross processed image.
4
Use the four-way controller (23) to select a number, and
press the 4 button.
The settings of the selected image are saved to [Favorite 1 - 3] and the
selected image appears in the single image display.
You can also change the settings from the [A Rec. Mode 1] menu.
Saving the Cross Processing Settings of a Captured
Image
Save as Favorite 2
Save as Favorite 2
Save as Favorite 1
Save as Favorite 1
Saves this image's Cross
Saves this image's Cross
Processing settings
Processing settings
100-0001
100-0001
Save as Favorite 3
Save as Favorite 3
OK
OK
OK
Cancel
Cancel
MENU
e_kb524_84percent.book Page 158 Friday, June 15, 2012 12:13 PM