Pentax 15613 Digital Camera User Manual


 
214
Changing Additional Settings
7
You can set the camera to turn off automatically if unused after a certain
length of time.
Set in [Auto Power Off] of the [R Set-up 2] menu. Select from [1min.]
(default setting), [3min.], [5min.], [10min.], [30min.], or [Off].
Sets the type of AA batteries used in the optional AA Battery Holder
D-BH109. The default setting is [Auto-detect].
1
Select [AA Battery Type] in the [R Set-up 3] menu, and press
the four-way controller (5).
The [AA Battery Type] screen appears.
2
Use the four-way controller (23) to
select a battery type, and press the
4 button.
When set to [Auto-detect], the camera will
automatically detect the type of batteries
being used.
3
Press the 3 button.
The screen that was displayed before selecting the menu item appears
again.
Battery Settings
Minimizing Battery Consumption
Perform any of the following operations to reactivate the camera from Auto
Power Off.
Turn the camera off and on again.
Press the shutter release button halfway.
Press the Q button, 3 button or M button.
The Auto Power Off function does not work when a slideshow is played back,
or when the camera is connected to an AV device with an USB cable.
Setting the Battery Type
AA Battery Type
AA Battery Type
Auto-detect
Auto-detect
Lithium
Lithium
Nickel-Metal Hydride
Nickel-Metal Hydride
Alkaline
Alkaline
MENU
Exit
Exit
123
e_kb524_84percent.book Page 214 Friday, June 15, 2012 12:13 PM