Pentax 15613 Digital Camera User Manual


 
133
Shooting Functions
4
5
Use the four-way controller (45) to select hours, minutes, or
seconds, and use the four-way controller (23) to set the time.
Press the 4 button to complete the setting.
6
Use the four-way controller (23) to select [Start Interval], and
press the four-way controller (5).
7
Use the four-way controller (23) to select [Now] or [Set
Time], and press the 4 button.
If you selected [Now], proceed to Step 10.
8
Use the four-way controller (23) to select [Start Time], and
press the four-way controller (5).
9
Use the four-way controller (45) to select hours or minutes,
and use the four-way controller (23) to set the time.
Press the 4 button to complete the setting.
10
Use the four-way controller (23) to select [Start shooting],
and press the 4 button.
The camera is ready to record a movie.
11
Press the shutter release button halfway.
The autofocus system operates.
12
Press the shutter release button fully.
When [Start Interval] is set to [Now], a picture is taken immediately,
Instant Review is displayed, and then the monitor turns off.
After the set number of pictures are taken, [Interval Shooting complete]
is displayed, and the camera returns to normal standby mode.
When recording with Interval Movie, use the optional AC adapter kit or install a
fully charged battery. If the battery becomes depleted during Interval Movie
recording, recording may stop.
e_kb524_84percent.book Page 133 Friday, June 15, 2012 12:13 PM