Filter
Top Products
118
Shooting Functions
4
6
Press the shutter release button
fully.
For g, the self-timer lamp starts blinking
slowly and then blinks rapidly 2 seconds
before the shutter is released. A beep is
heard and the rate increases. The shutter
will be released about 12 seconds after
the shutter release button is pressed fully.
For Z, the shutter will be released about 2 seconds after the shutter
release button is pressed fully.
• Select [Single Frame Shooting] in the Drive Mode setting screen to cancel
shooting with the self-timer. The setting is canceled automatically when the
camera is turned off if you clear the check box for [Drive Mode] in [Memory]
of the [A Rec. Mode 4] menu. (p.215)
• The Shake Reduction function is not available.
• You can set the camera so that the beep does not sound. (p.206)
• The exposure may be affected if light enters the viewfinder (except in a
mode). Use the AE Lock function (p.94) or attach the optional ME viewfinder
cap.
e_kb524_84percent.book Page 118 Friday, June 15, 2012 12:13 PM