Pentax 15613 Digital Camera User Manual


 
172
Shooting Settings
5
2
Change the settings as necessary.
The capture mode can be changed in
[Exposure Mode] of the [A Rec. Mode 1]
menu.
This screen appears only when the mode
dial is set to B or C.
3
Take a picture.
Resets the settings saved as A mode to the default settings.
1
Select [Reset USER Mode] in Step 3 on p.169, and press the
four-way controller (5).
The [Reset USER Mode] screen appears.
2
Use the four-way controller (23) to select [USER1] or
[USER2], and press the four-way controller (5).
3
Press the four-way controller (2) to
select [Reset], and press the 4
button.
The A mode settings return to the
default values and the screen that was
displayed before selecting the menu item
appears again.
The settings changed in Step 2 are not saved as A mode settings. When
the camera is turned off, the camera returns to the original saved settings. To
change the settings, save the A mode settings again.
Resetting to Default Settings
Custom Image
Custom Image
Digital Filter
Digital Filter
Image Capture Settings
Image Capture Settings
AE Metering
AE Metering
1 234
HDR Capture
HDR Capture
Exposure Mode
Exposure Mode
Cancel
Cancel
MENU
OK
OK
OK
Reset USER Mode
Reset USER Mode
Resets USER1 custom mode
Resets USER1 custom mode
to default settings and name
to default settings and name
Cancel
Cancel
Reset
Reset
OK
OK
OK
MENU
e_kb524_84percent.book Page 172 Friday, June 15, 2012 12:13 PM