Pentax 15613 Digital Camera User Manual


 
221
Changing Additional Settings
7
When images are captured with this camera, a folder is automatically created
and the captured images are stored in the new folder. Each folder name
consists of a sequential number from 100 to 999 and a string of 5 characters.
You can change the folder name in [Folder Name] of the [
R
Set-up 2] menu.
You can create a new folder on an SD Memory Card. A folder is created with
the number following the number of the folder currently being used. The newly
created folder is used to store images starting with the next captured image.
1
Select [Create New Folder] in the [R Set-up 2] menu, and
press the four-way controller (5).
The [Create New Folder] screen appears.
2
Press the four-way controller (2) to
select [Create folder], and press the
4 button.
A folder with a new number is created.
Changing the Naming System of the Folder
Date
The two digits of the month and day on which the picture was taken are
assigned as the folder name in the form of [xxx_MMDD]. (default setting)
[MMDD] (month and day) appears according to the display format set
in [Date Adjustment] (p.58).
Example: 101_0125 (folder for images taken on January 25th)
PENTX
The folder name is assigned in the form of [xxxPENTX].
Example: 101PENTX
A maximum of 500 images can be stored in a single folder. When the number
of captured images exceeds 500, a new folder is created to store the additional
images. In Exposure Bracketing shooting, images will be stored in the same
folder until shooting is completed, even if the number of images exceeds 500.
Creating New Folders
Create New Folder
Create New Folder
Creates a new storage folder
Creates a new storage folder
with the following name:
with the following name:
101PENTX
101PENTX
Cancel
Cancel
Create folder
Create folder
OK
OK
OK
e_kb524_84percent.book Page 221 Friday, June 15, 2012 12:13 PM