Filter
Top Products
216
Changing Additional Settings
7
2
Use the four-way controller (23) to
select an item, and use the four-way
controller (45) to select O or P.
Turn the rear e-dial (S) to display the
[Memory 2] screen.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
O Settings are saved even when the camera is turned off.
P
Settings are returned to their default values when the camera is
turned off.
• In [Shooting Info Display], you can set whether to save the type of information
displayed in standby mode. (p.27)
• Set [File No.] to O to continue the sequential numbering (four digits) for the
file name even if a new folder is created.
• When [Reset] of the [R Set-up 2] menu is performed, all Memory settings
return to the default values. (p.217)
MENU
Memory
Memory
Flash Mode
Flash Mode
Drive Mode
Drive Mode
White Balance
White Balance
Custom Image
Custom Image
Sensitivity
Sensitivity
EV Compensation
EV Compensation
Flash Exposure Comp.
Flash Exposure Comp.
1 2
P
The status screen is always displayed first when the camera is
turned on.
O
The display selected from the Shooting Info Display selection
screen (other than [Electronic Compass]) appears when the
camera is turned on.
O
The file number of the last image saved to the previous folder is
saved and subsequent images are assigned sequential file
numbers even if a new folder is created.
P
The file number of the first image saved to a folder returns to 0001
each time a new folder is created for saving images.
e_kb524_84percent.book Page 216 Friday, June 15, 2012 12:13 PM