Filter
Top Products
241
Using the Flash
9
With an AF540FGZ or AF360FGZ flash unit, you can discharge a flash to
take a picture at a shutter speed faster than 1/180 second.
1
Remove the cover of the hot shoe, and attach the external
flash.
2
Set the mode dial to b or a.
3
Turn on the camera and the external flash.
4
Set the external flash sync mode to HSb (high-speed sync).
5
Make sure that the external flash is fully charged, and then
take a picture.
The b will light in the viewfinder or Live View screen when the flash is
ready (fully charged).
Using the High-speed Sync Flash
•
High-speed sync is available only when the shutter speed is set faster than
1/180 sec.
• High-speed sync is not available in p mode.
• High-speed sync is not available with the built-in flash.
e_kb524_84percent.book Page 241 Friday, June 15, 2012 12:13 PM