Filter
Top Products
226
Camera Settings
10
Sets the type of batteries used in the camera. The default setting is [Auto-
detect].
1
Select [Select battery] in the [R Set-up 2] menu.
2
Press the four-way controller (5).
The [Select battery] screen appears.
3
Use the four-way controller (
23
)
to select the type of battery.
When set to [Auto-detect], the camera will
detect automatically the type of battery
used.
4
Press the 4 button.
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Auto Power Off will not work during slideshow playback or USB connection.
Setting the Battery Type
When a type of battery different from that selected in the menu setting is used,
the battery level will not be correctly determined. Please set the correct battery
type. Usually, there is no problem using automatic detection. However in low
temperatures and when using batteries that were stored for long periods of
time, set the appropriate battery type so the camera can correctly determine
the remaining battery level.
1 2 3
Brightness Level ±0
Reset
MENU
Cancel
OK
OK
OK
Select battery
Auto-detect
Nickel hydride
Alkali
Lithium
AUTO
Li
AL
Ni-MH
AUTO