Pentax K-m/K2000 Digital Camera User Manual


 
3
When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at a
wedding or during traveling). Pictures cannot be guaranteed if recording,
playback or transferring your data to a computer, etc. is not possible due to
a malfunction of your camera or recording media (SD Memory Card), etc.
Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
Do not subject the camera to high temperatures or high humidity. Do not
leave the camera in a vehicle, as the temperature can get very high.
Do not store the camera with preservatives or chemicals. Storage in high
temperatures and high humidity can cause mold to grow on the camera.
Remove from the case and store in a dry and well-ventilated location.
Do not subject the camera to strong vibrations, shocks, or pressure. Use a
cushion to protect the camera from vibrations of motorcycles, automobiles,
or ships.
The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
The monitor may appear black under high temperatures, but will return to
normal as temperatures normalize.
The monitor may respond more slowly at low temperatures. This is due to
liquid crystal properties, and is not a fault.
Periodic inspections are recommended every one to two years to maintain
high performance.
Sudden temperature changes will cause condensation on the inside and
outside of the camera. Place the camera in your bag or a plastic bag, and
remove the camera after temperature of the camera and surroundings are
equalized.
Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts.
These could cause a camera breakdown. Wipe dry any rain or water drops
on the camera.
Refer to “Precautions When Using the SD Memory Card” (p.43) regarding
the SD Memory Card.
Use a lens brush to remove dust accumulated on the lens or viewfinder.
Never use a spray blower for cleaning as it may damage the lens.
Please contact PENTAX Service Center for professional cleaning of the
CCD. (This will involve a fee.)
Please do not press forcefully on the monitor. This could cause breakage or
malfunction.
Depending on a user's physical condition, some users may experience
itching, break out in a rash or suffer from eczema. If an abnormality occurs,
immediately discontinue using the camera and seek medical attention.