Filter
Top Products
To attach the shoulder strap, connect the ends of the strap to
the eyelets on the back of the camera as shown. Be sure to
slide the plastic sleeve on each hook toward the eyelet until it
snaps, locking the strap securely.
Setting the SCSI ID The PDC-2000 camera is a Small Computer Systems Interface
(SCSI) device. You can connect up to seven SCSI devices to
your computer, one to another in a SCSI chain.
Note: If you are connecting the PDC-2000 camera to an IBM
PC or compatible computer, the computer must have an
ASPI-compliant SCSI adapter. (See System requirements on
page 2.)
The PDC-2000 camera’s SCSI ID is preset to 4 at the factory.
You do not need to change this number unless another SCSI
device in the chain is already using it. To determine whether 4
is already being used, check the user guides of the other
devices or run a SCSI utility program.
Setting up 11