Filter
Top Products
Setting up your Macintosh for the PDC-2000
To view PDC-2000 pictures stored in the camera, transfer
pictures from the camera to your computer, operate the
camera through the computer, or change camera setup
options, you must install one of the following programs on
your Macintosh. Both are provided with the PDC-2000
camera.
• PDC-2000 plug-in software Using the plug-in after it is
installed requires an image-processing application (not
provided) compatible with Adobe Photoshop plug-in modules.
• PDC-2000 Direct software If you do not have an image
processing application compatible with Photoshop plug-in
modules, you must install PDC-2000 Direct to use the
PDC-2000 with your computer. (If you install PDC-2000
Direct, you do not need the plug-in software described above
to use it.)
Installing the
plug-in software
To install the PDC-2000 plug-in software on your Macintosh:
1 Insert the PDC-2000 plug-in installation disk into an internal
or external drive.
2 If the disk contents are not already visible, open the disk.
3 Be sure to read any Read Me file included on the disk. The
Read Me file contains important late-breaking product
information that may affect installation or use.
4 Double-click the Installer icon to open the Installer program.
5 Click the Install button and follow instructions on the screen
to choose and Acquire/Export folder.
6 When an on-screen message indicates that installation has
been completed, click OK.
7 Restart your computer.
Setting up 21