Filter
Top Products
5 Connect the other end of the SCSI system cable (d) to the
SCSI connector on the PDC-2000 camera.
6 Connect the camera to AC power using the power
adapter/trickle charger (e).
IMPORTANT: ALWAYS CONNECT THE CAMERA TO
AC POWER WHEN IT IS CONNECTED TO THE
COMPUTER. IF THE CAMERA OR ANY OTHER SCSI
DEVICE TURNS OFF WHILE CONNECTED, IT COULD
CORRUPT DATA ON YOUR HARD DISK.
Setting up your PC for the PDC-2000
To view PDC-2000 pictures stored in the camera, transfer
pictures from the camera to your computer, operate the
camera through the computer, or change camera setup
options, you must install one of the following programs on
your PC. All are provided with the PDC-2000 camera.
• PDC-2000 TWAIN driver Using the TWAIN driver requires
an image-processing application (not provided) compatible
with the TWAIN specification.
• PDC-2000 plug-in software Using the plug-in requires an
image-processing application (not provided) compatible with
Adobe Photoshop plug-in modules.
• PDC-2000 Direct software If you do not have an image
processing application compatible with TWAIN or Photoshop
plug-in modules, you must install PDC-2000 Direct to use the
PDC-2000 camera with your computer.
Choosing the
software to install
The TWAIN driver is recommended for use with the
PDC-2000, since it is compatible with most Microsoft
Windows image processing applications capable of acquiring
images. (This includes Adobe Photoshop for Windows.)
26