Filter
Top Products
5 Connect the other end of the SCSI system cable (d) to the
SCSI connector on the PDC-2000 camera.
6 Connect the camera to AC power with the power
adapter/trickle charger (e).
IMPORTANT: ALWAYS CONNECT THE CAMERA TO
AC POWER WHEN IT IS CONNECTED TO THE
COMPUTER. IF THE CAMERA OR ANY OTHER SCSI
DEVICE TURNS OFF WHILE CONNECTED, IT COULD
CORRUPT DATA ON YOUR HARD DISK.
Connecting to an
Apple PowerBook
In addition to the cables and adapters described in the
previous sections, Apple PowerBook computers require an
HDI-30/DB25 adapter (available from Macintosh dealers) to
connect the PDC-2000 SCSI system cable to the PowerBook
SCSI port. (Do not use a SCSI dock adapter or a cable-type
adapter. These adapters may not work and could corrupt
data on your PowerBook hard disk.)
Other than the exceptions above, follow the instructions for
connecting to Macintosh computers (starting on page 17)
when connecting the PDC-2000 camera to an Apple
PowerBook computer.
WARNING: WITH POWERBOOK COMPUTERS, USE
ONLY THE 1-METER SCSI SYSTEM CABLE (PROVIDED
WITH THE PDC-2000) TO CONNECT THE CAMERA TO
THE COMPUTER OR TO THE LAST DEVICE IN THE
SCSI CHAIN. LONGER CABLES MAY CORRUPT DATA
OR DAMAGE THE COMPUTER’S HARD DRIVE.
20