Filter
Top Products
SAFETY INFORMATION
3
Do not open the camera case.
Any opening of the camera case is explicitly reserved to customer service. An
arbitrary opening of the case leads to the expiry of the warranty claims. No
liability will be assumed for personal injuries or damages caused by the arbitrary
opening of the camera case.
Handle the camera with care.
The Sinar Hy6 is a sensitive, high precision optical instrument. Please handle it
with the appropriate care. Avoid any agitation of the instrument and any soiling
of the optical surfaces, and observe the advice for the care and the maintenance
of the camera.
Do not insert any metal pieces into the electric contacts of the camera, of any
accessory parts or into the cable connections. There is the danger of an electric
shock or of damage to the camera and its component parts.
In the area of the operational elements at the camera body, the camera is
equipped with a magnet. Please observe that magnetic fields may cause damage
to watches, data carriers and magnet strips of cards etc. Please make sure not to
place these devices nearby the camera.
2.2 Advice Concerning the Camera
2.2.1 Advice for the Prevention of Injuries
Do not open the camera case and do not disassemble the camera.
There is the danger of an electric shock. If the camera is open due to damage of
the casing, do not touch the internal parts. Contact customer service.
To prevent the danger of explosion, do not use the camera nearby easily
inflammable liquids or gas.
To prevent injuries to the eyes, do not focus the camera lens onto the sun or
extremely hot light sources. In rare cases, the focusing of the camera onto
extremely hot light sources can lead to an impairment of your vision capability.
If the camera has been dropped into water, or if the internal parts have got in
contact with water, please remove the battery to prevent the danger of an
electric shock. Do not use the camera any more. Contact customer service.
If any abnormal behaviour of the camera (e.g. smoke, noise, smell) occurs during
operation, do not use the camera any more. Disconnect it from the power supply
and / or remove the battery. Contact customer service before you use the camera
again. In this way, injuries or damages can be prevented.