Filter
Top Products
ASSEMBLY INSTRUCTIONS
19
5.2 Attachment and Removal of the Lens
Fig. 5 / 10 Attachment of the lens Fig. 5 / 11 Lens
To attach the lens to the camera body, lock the lens contacts 2 with the contacts at the
camera body 1. The red dot marking 3 at the camera body indicates where the lens
bayonet 4 has to be placed. The same red marking can also be found at the lens 4.
- Place the camera in front of you with the back facing you, and press the Lens Release
Button 5.
- The red mark at the lens 4 has to contact the red mark at the camera body 3.
- Turn the lens left (anti-clockwise) until it is locked. You will hear a click when the lens is
locked properly.
- To remove the lens, place the camera in front of you with the back facing you. Press the
Lens Release Button 5 and hold the lens above of the focusing ring. Turn the lens right
(clockwise) and remove the lens.
To check that the lens is locked correctly, please turn the attached lens left (anti-
clockwise) without pressing the Lens Release Button 5.
1
3
4
2 5