Filter
Top Products
USE OF THE FLASH
74
Fig. 14 / 5 Select flash mode
Use the Front Control Wheel W1 to select the
flash mode. The modes “Normal Sync” and
“Rear Sync” can be selected.
Using the Rear Control Wheel W2, the flash
compensation can be set.
Normal
sync
The flash is synchronized towards the opening of the shutter. The flash is
activated directly after the shutter is completely opened.
Rear sync
The flash is synchronized towards the closing of the shutter. The flash is
activated about 3 ms before the shutter is closed.
14.6 Flash Compensation
Fig. 14 / 6 Flash compensation
Using the Rear Control Wheel W2, the flash
compensation can be set. The flash
compensation comprises a range from –3
EV to +3 EV and can be set in steps of 0,3
EV.
When the flash compensation is used, the
light balance appears in the hand grip
display.