Sinar Hy6 Digital Camera User Manual


 
USE OF THE FLASH
72
Fig. 14 / 1 Hot shoe
To the hot shoe with the SCA-contacts 1,
portable flash devices / the Rollei SCA-3562
Flash Adapter has to be connected.
The hot shoe is equipped with contacts
enabling the TTL-measurement, flash
synchronization and the exchange of the
flash and camera data.
The flash device is connected correctly
when you hear a click. Please refer also to
the documentation of your flash adapter
and your flash device.
Background information: When TTL-flash measurement is used, the exposure during
flash use is measured “through the lens”, i. e. the light quantity that actually falls onto the
sensor is measured. Based on this measurement, the intensity and duration of the flash is
regulated automatically.
Please refer to the documentation of your flash device and to the
documentation of your Rollei SCA-3562 Flash Adapter for further
information.
14.3 The X-Contact – Manual Flash Control
Via the x-contact, the manual flash operation is enabled.
The flash is synchronized with the camera shutter (normal sync / rear sync)
Æ chapter 14.5 ”Flash options and flash compensation”.
Flash intensity and aperture settings have to be set at the flash unit, refer to the manual of
your flash device.
1