Filter
Top Products
ASSEMBLY INSTRUCTIONS
21
5.3.2 Assembly and Attachment of the Sinarback and the Adapter Plate
To attach a Sinarback to the camera body, an adapter kit with the necessary accessories
and tools has to be used. The adapter kit is included in the delivery of the following Sinar
Hy6 systems:
• Sinar Hy6-e75
• Sinar Hy6-e54
• Sinar Hy6-m54
If a Sinar Hy6 711.14.041 (only camera body), an adapter kit is not included in the delivery
and has to be purchased separately. The Sinarbacks e75 LV / e54 LV and the Sinarback 54
MC require different adapter kits. Please contact your dealer for further information
5.3.2.1 Assembly and Attachment of a Sinarback eMotion
The following description applies to the Sinar Hy6 systems Hy6-e75 and Hy6-e54, and to
the assembly of the Sinarbacks e75 LV and e54 LV to a Sinar Hy6.
First, remove the protective cover that is fixed with two screws from the back.
Follow the assembly instructions described below.
1 Sinarback e75 LV or e54 LV
The following parts are included in the
adapter kits for the Sinarbacks e75 LV and
e54 LV:
2 Adapter plate
3 Spacer
4 Screws
5 Screwdriver
Fig. 5 / 12 Sinarback eMotion and adapter kit
When attaching a back or a film magazine, make sure that all four of the pins are
locked simultaneously. When not all four of the pins are locked, the back or film
magazine has to be removed from the camera body and re-attached, otherwise
the back or magazine can fall off. Please make sure that the back is attached
safely to the camera body to prevent any damage by falling off of the magazine.
1
2
3
4
5