Filter
Top Products
SHOOTING MODES
65
12.4 Focus Trap
With a Focus Trap, the shutter release is triggered automatically when an object appears
in a defined focus plane in the scene.
To use the Focus Trap, the Auto Focus functions have to be inactive. If you are
working with an auto focus lens, set the Focus Mode Selector Switch S6 to “M”
to activate the manual focusing.
To select the Focus Trap, set the Shooting
Mode Selector Switch S1 to “Options /
Remote Control“ and press the button B10
to open the menu “Shooting”. Use the Rear
Control Wheel W2 to select “Focus Trap”.
Fig. 12 / 6 Menu “Shooting – Focus Trap”
Apply the focus to a specific area in the image manually using the focusing ring at the
lens. Focus the camera onto the desired image scene, and press the Release Button B1.
The camera remains in the tensioned state
until an object appears in the defined focus
plane.
As soon as the object is in focus, the shutter
is automatically released and the image is
captured.
Fig. 12 / 7 Display at the start of the Focus Trap
To cancel an activated Focus Trap, press the Release Button B1 again.
The Focus Trap can be used with all exposure modes.
The Focus Trap cannot be used when the function “Mirror Up” is used.